Have Any Questions?


Fooaima Spring works to provide great service in the precision manufacturing of custom springs,wire forms and stamping parts. For easy reference, we've included answers on our web site to some of the questions we are frequently asked. If you have a question you don't see here, please contact fooaima spring team, we are always ready to answer any questions you might have.

Q1: Are you a manufacturer?

Fooaima is a custom manufacturer of compression springs,extension springs,torsion springs, wire forms and metal stampings. Every order produced is manufactured to meet individual order requirements.

Q2: Do you manufacture small quantities of springs and wire forms, or do you only manufacture large runs?

We manufacture large runs, short runs, and custom wire forms and springs prototypes. We can work with you to determine the best and most cost effective manufacturing solution for your part.

Q3: How can i get a quotation?

A sample is always best, followed by a detailed drawing. With all types of springs we will need to know the wire size and type,the side or outside diameter,the total coil count and the length of the spring. Other measurements may be required,which one of our sales staff will request.

Q4: Does FOOAIMA spring offer design or start-up assistance on springs, wire forms and metal stampings?

Yes ... We have technical staff who will be happy to discuss your individual requirements in simple terms to help you work out exactly what you need.

Q5: Can you send samples for confirmation? Are they free?

Yes,Fooaima can offer samples free for testing before production,while the freight will be for your account. 

Q6: how long will it take to make samples?

We can turn round very quick,typically,it takes 2-4days to finish. It depends, contact our custom spring department can advise you regarding this procedure.

Q7: What is average lead time for springs,wire forms or metal stamping production?

This varies depending on order quantity,manufacturing processes,finishing operations and packing solution required. The average lead time for spring or wire forms production is approximately 2 – 4 weeks. Expedited options are available, so please contact fooaima custom spring department for a more specific lead time estimate.

Q8: Can you help with emergencies or urgent orders?

Yes … We can prioritize manufacturing for an urgent order or despatch a suitable stock spring immediately depending on your requirements.

Q9: What’s your product range?

Fooaima custom made spring&wire forms for all your things.

1. Custom Springs (compression springs, extension springs, torsion springs,coil springs,small springs,metal springs, steel springs and so on)

2. Custom Steel Wire Products (wire forms, metal clips,metal hooks,metal hanger,wire basket, wire crafts, wire decoration and more.)

3. Metal Stamping Parts (precise stamping parts, metal spring clips, flat springs,clock springs etc.)


Fooaima Spring has the capacity to manufacture springs from .008 inches to .750 inches in wire diameter.

Q11: How do you control the quality?

We consider quality as most important factor, and employ QC with 5 years of experience, and very rigid to quality control. Every goods have to pass 3 times check, and our inspection standard is much more rigid, so we can make sure good quality.

Q12: What spring material is best for my order?

There are a number of considerations when determining which material type should be used. Environment concerns, application and operating stress requirements all affect material choice. 

However,these are some of the materials we work with:

* Carbon Steel

* Music Wire

* Stainless Steel

* Copper

* Brass

* Inconel

* Monel

* Aluminum

If you don't see the needed material included here,please contact Fooaima Spring at fooaimaspring@126.com we would be happy to custom made springs or wire forms for your applications.

Q13: What types of finishes are available?

Here we have listed some of the finishes we frequently supply springs and wire forms to:

Nickel plated 

Chrome plated

Zinc Plating


black oxide coating 

Manganese Phosphate


Salt spray testing

Powder coatings 


Passivated (on stainless steel)

and so on

If you don't see the needed finish included here,please contact Fooaima Spring at fooaimaspring@126.com we would be happy to custom made springs or wire forms for your applications.

Q14: What industry does Fooaima spring&wire forms supply for?

We manufacture springs for a variety of industries worldwide, including:



POP display




Sporting Goods

automotive work


If you don't see your industry included here,please contact Fooaima Spring at fooaimaspring@126.com we would be happy to custom made springs or wire forms for your applications.

Copyright © FOOAIMA Spring&Wire Forms All Rights Reserved.